27 replies to this topic

[Sûre]

There are parks on Ne design which do 1-300... Ko, i can't launch with winap or filzip, how does it do ?

When i go to editor and that i do avanced to select my own objetcs, on main window (here there are the most objects), i can't lower list, i am jamed at the top of list. How do i do to resolve this problem ?

[Emergo]

There are parks on Ne design which do 1-300... Ko, i can't launch with winap or filzip, how does it do ?

When i go to editor and that i do avanced to select my own objetcs, on main window (here there are the most objects), i can't lower list, i am jamed at the top of list. How do i do to resolve this problem ?

Sorry Sure, the first sentence I don´t understand ........

The second one - about selecting objects - is a known issue however that all beginners soon encounter.....

It means you do have too many objects in your ObjData folder.
This makes that you cannot scroll anymore through the small objects.

There is a limit of objects you can have in your ObjData folder of around 5000 objects. ( can be some hundred more or some hundred less, depending on how much objects are small or large scenery).
It does not give any problem to open parks in general, but it gives problems in the editor.

The solution is to clear out your ObjData folder (delete objects) and then it will work fine again.

If you need more help, just let us know...

Emergo

[Sûre]

Ty for answer.

I am going to try to reformulate my first question.

On the Ne Desing site (New Element), there are parks which are downloadable. Although, some one of them do 100- 300 Ko about ( ils font environ 100-300 Ko d'espace, en tant que fichier) instead of doing 1-3 Mo... or parcs which do 1-300 Ko don't function, why ?

[Emergo]

Ty for answer.

I am going to try to reformulate my first question.

On the Ne Desing site (New Element), there are parks which are downloadable. Although, some one of them do 100- 300 Ko about ( ils font environ 100-300 Ko d'espace, en tant que fichier) instead of doing 1-3 Mo... or parcs which do 1-300 Ko don't function, why ?

If parks are that small in filesize, it mostly means that they have been uploaded without having the custom scenery exported.
Saving a park with exported scenery makes the filesize a lot bigger....

And because the scenery is not exported, you can only open those parks if you happen to have all objects that are used already in your ObjData folder.
If you know on which workbench the park is made, you can first download and open that workbench to get the scenery.
For instance: if it is a PT2 park, first download and open the PT2 workbench, and then you can open that park.

One other thing you should notice: On NE still are a lot of RCT1-parks, and with a lot of them they don´t say whether it is RCT1 or RCT2, and sometimes it is difficult to see it from the pictures (if there are any).
You cannot open an RCT1 park in RCT2.
RCT1 parks are .SV4 files.
RCT2 parks are .SV6 files.

Hope this helps....

Emergo

[Rohn Starr]

You can open RCT1 parks in RCT2, but you have to convert them to scenarios first. And most of the RCT1 parks currently available are hacked which will almost always give you en error trapper when you try to convert them.

[Sûre]

ty for answers. RCT 1 seem to be complete made of objects rather.


I can see enought often someone who are using hacks (maybe) as possibility to lift up water over objects... Though i don't speak much english and i don't manage to find how must i do. If someone could put me answer for that ty. I would like to know how do to put objects in spite of path too. Merci d'avance.

[Emergo]

ty for answers. RCT 1 seem to be complete made of objects rather.
I can see enought often someone who are using hacks (maybe) as possibility to lift up water over objects... Though i don't speak much english and i don't manage to find how must i do. If someone could put me answer for that ty. I would like to know how do to put objects in spite of path too. Merci d'avance.

Though I do speak some - reasonable - French for daily life things or discussing arts/literature and music and the like, I certainly don´t speak it well enough for explaining things in RCT----that´s quite another catagory .
So I´ll give you my answer in English.

- to lift up water over objects, or rides:

1) build the objects/scenery you want to have under the water-level.
Just build them on (lowered) land, with no water over them yet.

2) go to 8 cars Zero Clearances and choose `absolute`.

3) back in game, drag/lift up the water (with the water-feature) over the objects/scenery/ride-tracks you want.

4) go back to the trainer and `restore clearances`.

Note: some things will look ugly----sticking unwantedly for half out of the water and/or leaving holes in the water. This means you have to place them lower before dragging the water over them.

For building on paths:

1) build the path.

2) go to 8 cars trainer and choose `zero all clearances----absolute`

3) now place whatever you want over the paths.

4) go back to trainer and do ` restore clearances`.

Sometimes this will give a glitch.

Sometimes it will help to do zero clearances again, and build again the objects that you want on the path.

Hope this helps.....

Emergo

[Sûre]

ty for help, i go again after having it used.

Though I do speak some - reasonable - French for daily life things or discussing arts/literature and music and the like, I certainly don´t speak it well enough for explaining things in RCT

You use a basic vocabulary to express things because RCT don't have really a cultural structure and even if it remains some words which are it own, you can express it in french as you must surently have a mastery in french grammary so as to speak arts and literature, which ask a cultural mastery more important. Now it's sure RCT can be expressed some way thanks to different point of view, as all, but i didn't see point of view which call for really studies, knowledge more sound. ^^ So If you could prop up on what you wanted to express, i will be curious to see your knowledge in these subjects too^^, ty.


EDIT: You would can do me your object data please ? I think it must be set up good. Ty

Edited by Sûre, 02 September 2007 - 01:54 PM.